Download Sound Radix Autoalign for Free - The Best Plugin for Microphone Alignment and Phase Correction
Sound Radix Autoalign: The Ultimate Plugin for Microphone Alignment and Phase Correction
If you are a musician, producer, or engineer who works with multiple microphones, you know how challenging it can be to achieve a coherent and balanced sound. You may have encountered problems such as comb-filtering, transient smearing, phase cancellation, or loss of clarity and punch. These problems are caused by the misalignment of the microphones in time and phase, which can happen due to various factors such as distance, placement, polarity, filtering, or processing.
Sound Radix Autoalign .torrent
Fortunately, there is a plugin that can solve these problems for you in a matter of seconds. It is called Sound Radix Autoalign, and it is the ultimate plugin for microphone alignment and phase correction. In this article, we will explain what Sound Radix Autoalign is, how it works, what are its benefits, how to use it in your projects, where to get it, and how much it costs. By the end of this article, you will have a clear understanding of why Sound Radix Autoalign is an indispensable tool for anyone who works with multiple microphones.
What is Sound Radix Autoalign and why do you need it?
The problem of microphone alignment and phase issues
When you record a sound source with multiple microphones, such as drums, guitar amps, vocals, or acoustic instruments, you want to capture the full and detailed sound of the source. However, if the microphones are not aligned properly in time and phase, you may end up with a thin, muddy, or distorted sound instead.
This is because the sound waves from the source reach each microphone at different times and angles, creating differences in amplitude and phase between the signals. When these signals are combined together in your DAW or mixer, they interfere with each other constructively or destructively, depending on their relative phase. This results in frequency-dependent peaks and dips in the frequency response (comb-filtering), reduced transient response (transient smearing), or partial or complete cancellation of certain frequencies (phase cancellation).
These problems can ruin your recordings and make your mixing process more difficult and time-consuming. You may try to manually align the microphones by zooming in on the waveforms and shifting them until they look aligned. However, this method is not very accurate or reliable, as it does not account for the phase differences within specific frequency ranges. Moreover, it can be tedious and impractical when dealing with many tracks or complex setups.
The solution of Sound Radix Autoalign
This is where Sound Radix Autoalign comes in handy. Sound Radix Autoalign is an automatic microphone alignment and phase correction plugin that can align any number of microphones in a single click. It can also detect if any microphone is reversed in polarity and compensate for it.
Sound Radix Autoalign works by "listening" to two audio tracks at a time (a reference track and a target track), sample-accurately time-shifting the target track until they are perfectly aligned, and applying a phase correction filter to the target track to optimize its phase relationship with the reference track. It can also optimize the phase relationship between multiple tracks by using a spectral phase optimization algorithm that minimizes the phase differences within specific frequency bands.
Sound Radix Autoalign is very easy to use and requires minimal user input. You just need to insert the plugin on each track that you want to align, select a reference track and a target track, and press the "Auto Align" button. The plugin will do the rest for you in a matter of seconds. You can also adjust some parameters such as the delay range, the filter range, the filter slope, and the absolute phase inversion if you want more control over the alignment process.
Sound Radix Autoalign is compatible with any DAW that supports VST, AU, AAX, or RTAS formats. It can handle any type of audio material, such as mono, stereo, or multichannel tracks. It can also work with any type of microphone setup, such as close mics, overheads, room mics, or spot mics. It can even align microphones that are not physically aligned, such as microphones placed on different sides of a drum kit or a guitar cabinet.
How does Sound Radix Autoalign work?
The one-click workflow
The main feature of Sound Radix Autoalign is its one-click workflow that allows you to align any number of microphones in a single click. Here is how it works:
Insert Sound Radix Autoalign on each track that you want to align.
Select a reference track and a target track by clicking on the "Ref" and "Tar" buttons on the plugin interface.
Press the "Auto Align" button and wait for the plugin to finish the alignment process.
Repeat steps 2 and 3 for each pair of tracks that you want to align.
That's it! You have successfully aligned your microphones and corrected their phase issues. You can now enjoy a coherent and balanced sound from your multiple microphone recordings.
The next generation algorithm
The core of Sound Radix Autoalign is its next generation algorithm that can align any number of microphones with sample-accurate precision and phase coherence. The algorithm works by analyzing the signals from the reference track and the target track, detecting their time and phase differences, and applying a delay and a phase correction filter to the target track accordingly.
The algorithm can handle any type of audio material, such as drums, guitars, vocals, or acoustic instruments. It can also handle any type of microphone setup, such as close mics, overheads, room mics, or spot mics. It can even align microphones that are not physically aligned, such as microphones placed on different sides of a drum kit or a guitar cabinet.
The algorithm is very fast and efficient, as it can align two tracks in less than a second. It is also very accurate and reliable, as it can align two tracks within 0.01 ms of accuracy and optimize their phase relationship within 0.1 degree of accuracy.
The spectral phase optimization
One of the unique features of Sound Radix Autoalign is its spectral phase optimization algorithm that can optimize the phase relationship between multiple tracks within specific frequency bands. This feature is useful when you want to align more than two tracks at once, such as when you have multiple microphones on a single sound source or multiple sound sources in a single recording.
The spectral phase optimization algorithm works by analyzing the signals from all the tracks that you want to align, dividing them into frequency bands using a multiband filter bank, and applying a phase correction filter to each band separately. This way, the algorithm can minimize the phase differences between the tracks within each frequency band, resulting in a more natural and coherent sound.
You can adjust some parameters of the spectral phase optimization algorithm, such as the number of bands (from 1 to 8), the crossover frequencies (from 20 Hz to 20 kHz), and the filter slopes (from 6 dB/octave to 48 dB/octave). You can also bypass or solo each band individually to hear how they affect the sound.
The absolute phase optimization
Another unique feature of Sound Radix Autoalign is its absolute phase optimization algorithm that can optimize the absolute phase polarity of each track relative to the reference track. This feature is useful when you want to correct any polarity inversion that may have occurred due to wiring errors, microphone placement errors, or processing errors.
The absolute phase optimization algorithm works by analyzing the signals from the reference track and each target track, detecting if any target track is reversed in polarity and inverting it if necessary. This way, the algorithm can ensure that all the tracks have the same polarity as the reference track, resulting in a more consistent and powerful sound.
You can adjust some parameters of the absolute phase optimization algorithm, such as the delay range (from 0 to 100 ms), the filter range (from 20 Hz to 20 kHz), and the filter slope (from 6 dB/octave to 48 dB/octave). You can also bypass or invert the absolute phase optimization for each track individually to hear how they affect the sound.
What are the benefits of using Sound Radix Autoalign?
Improved clarity, size, and stereo image
One of the main benefits of using Sound Radix Autoalign is that it can improve the clarity, size, and stereo image of your multiple microphone recordings. By aligning and phase-correcting your microphones, you can eliminate any comb-filtering, transient smearing, or phase cancellation that may have degraded your sound quality. This will result in a more transparent, detailed, and natural sound that preserves the character and tone of your sound source.
Moreover, by optimizing the phase relationship between your microphones within specific frequency bands, you can enhance the size and stereo image of your sound source. You can create a wider and deeper soundstage that captures the spatial and ambient information of your recording environment. You can also create a more balanced and focused sound that avoids any frequency masking or panning issues.
Enhanced low-end definition and punch
Another benefit of using Sound Radix Autoalign is that it can enhance the low-end definition and punch of your multiple microphone recordings. By aligning and phase-correcting your microphones, you can avoid any phase cancellation that may have reduced or canceled out some of the low frequencies in your sound source. This will result in a more solid, tight, and powerful low-end that adds weight and impact to your sound source.
Furthermore, by optimizing the absolute phase polarity of your microphones relative to the reference track, you can ensure that all the low frequencies are in phase with each other. This will result in a more coherent and consistent low-end that avoids any polarity inversion or phase inversion issues.
Faster and easier mixing and producing
A third benefit of using Sound Radix Autoalign is that it can make your mixing and producing process faster and easier. By aligning and phase-correcting your microphones, you can save time and effort that you would otherwise spend on manually aligning them or fixing their phase issues. You can also avoid using additional plugins or processors that may introduce latency, artifacts, or CPU load to your system.
In addition, by optimizing the phase relationship between your microphones within specific frequency bands and optimizing their absolute phase polarity relative to the reference track, you can reduce the need for further EQ or compression adjustments. You can also achieve a more balanced and natural sound that requires less tweaking or editing.
How to use Sound Radix Autoalign in your projects?
The system requirements and compatibility
Before you use Sound Radix Autoalign in your projects, you need to make sure that your system meets the minimum requirements and that your DAW is compatible with the plugin format. Here are the system requirements and compatibility information for Sound Radix Autoalign:
Operating System
Minimum Requirements
Supported Plugin Formats
Windows
Windows 7 or higher (32-bit or 64-bit)
VST2 / VST3 / AAX / RTAS
Mac OS X
Mac OS X 10.7 or higher (32-bit or 64-bit)
AU / VST2 / VST3 / AAX / RTAS
iOS
iOS 9.0 or higher (32-bit or 64-bit)
AUv3
You also need to have an internet connection for downloading, installing, and activating the plugin.
The installation and activation process
To use Sound Radix Autoalign in your projects, you need to install and activate the plugin on your system. Here are the steps for installing and activating Sound Radix Autoalign:
Download the plugin installer from the official website or online store.
Run the installer and follow the instructions on the screen.
Select the plugin formats that you want to install and choose a destination folder for them.
Launch your DAW and scan for new plugins.
Insert Sound Radix Autoalign on a track and open the plugin interface.
Click on the "Activate" button and enter your email and serial number that you received after purchasing the plugin.
Click on the "Activate Online" button and wait for the confirmation message.
Congratulations! You have successfully installed and activated Sound Radix Autoalign on your system. You can now use it in your projects as much as you want.
The user interface and controls
Sound Radix Autoalign has a simple and intuitive user interface that allows you to access all the features and controls of the plugin. Here is a brief overview of the user interface and controls of Sound Radix Autoalign:
The user interface consists of four main sections: the header, the main display, the footer, and the settings menu.
The header shows the name and version of the plugin, as well as the activation status and the bypass button.
The main display shows the waveform of the reference track and the target track, as well as the delay and phase correction values applied to the target track. You can zoom in or out on the waveform by using the mouse wheel or dragging the bottom bar. You can also solo or mute each track by clicking on their names.
The footer contains the main controls of the plugin, such as:
The "Ref" and "Tar" buttons that allow you to select a reference track and a target track from a drop-down menu of all the tracks that have Sound Radix Autoalign inserted on them.
The "Auto Align" button that initiates the alignment process between the reference track and the target track.
The "Delay Range" knob that sets the maximum amount of delay that can be applied to the target track (from 0 to 100 ms).
The "Filter Range" knob that sets the frequency range of the phase correction filter that can be applied to the target track (from 20 Hz to 20 kHz).
The "Filter Slope" knob that sets the steepness of the phase correction filter that can be applied to the target track (from 6 dB/octave to 48 dB/octave).
The "Phase Invert" button that inverts the absolute phase polarity of the target track relative to the reference track.
The settings menu contains some additional options and features of the plugin, such as:
The "Spectral Phase Optimization" section that allows you to enable or disable the spectral phase optimization algorithm, adjust its parameters (number of bands, crossover frequencies, filter slopes), and bypass or solo each band individually.
The "Absolute Phase Optimization" section that allows you to enable or disable the absolute phase optimization algorithm, adjust its parameters (delay range, filter range, filter slope), and bypass or invert each track individually.
The "Preferences" section that allows you to customize some aspects of the plugin, such as its appearance, behavior, performance, and updates.
The "Help" section that provides access to some useful resources, such as the user manual, video tutorials, online support, and feedback form.
The best practices and tips
To get the most out of Sound Radix Autoalign, here are some best practices and tips that you should follow:
Use Sound Radix Autoalign as early as possible in your signal chain, before applying any other plugins or processors that may affect the time and phase alignment of your microphones.
Use Sound Radix Autoalign on each pair of tracks that you want to align, starting from the closest pair to the farthest pair. For example, if you have four microphones on a drum kit (kick, snare, overhead left, overhead right), you can align them in this order: kick and snare, kick and overhead left, kick and overhead right, snare and overhead left, snare and overhead right, overhead left and overhead right.
Use Sound Radix Autoalign on each group of tracks that belong to the same sound source or recording. For example, if you have multiple tracks of guitar amps, vocals, or acoustic instruments, you can align them separately from each other.
Use Sound Radix Autoalign on tracks that have similar frequency content and dynamics. For example, if you have a track of a bass guitar and a track of a kick drum, you may not need to align them, as they have different frequency ranges and transient characteristics.
Use Sound Radix Autoalign with caution on tracks that have intentional time or phase differences. For example, if you have a track of a direct input (DI) signal and a track of an amp signal of a guitar or a bass, you may want to preserve some of the time or phase differences to create a richer and fuller sound.
Use Sound Radix Autoalign with moderation on tracks that have natural or creative time or phase differences. For example, if you have a track of a room microphone and a track of a close microphone of a sound source, you may want to keep some of the time or phase differences to create a sense of depth and space.
Use Sound Radix Autoalign with your ears and not your eyes. While the plugin can show you the waveform alignment and the phase correction values, you should always listen to the sound and judge if it sounds better or worse after using the plugin. You can also use the bypass button to compare the sound before and after using the plugin.
Where to get Sound Radix Autoalign and how much does it cost?
The official website and online store
The best place to get Sound Radix Autoalign is from the official website and online store of Sound Radix. Here is the link to the website: https://www.soundradix.com/products/auto-align/
On the website, you can find more information about the plugin, such as its features, specifications, reviews, testimonials, video tutorials, user manual, and support. You can also download a free trial version of the plugin that you can use for 14 days without any limitations.
On the online store, you can purchase the plugin using various payment methods such as credit card, PayPal, or wire transfer. You can also choose between different currencies such as USD, EUR, GBP, JPY, or AUD. You will receive an email with your serial number and download link after completing your purchase.
The pricing and licensing options
The price of Sound Radix Autoalign is $149 USD for a single license. However, you can save money by purchasing it as part of a bundle with other Sound Radix plugins. Here are some of the bundle options available:
The Radical Bundle 3: includes Auto-Align Post (a post-production version of Auto-Align), Drum Leveler (a dynamic processor for drums), Pi (a phase interaction mixer), POWAIR (a smart compressor), SurferEQ (a pitch-tracking equalizer), SurferEQ 2 Boogie (a three-band equalizer), SurferEQ 2 (an upgraded version of SurferEQ), 32 Lives (a 32-bit to 64-bit adapter), Muteomatic (a talkback management plugin), and POWAIR Stage (a live performance version of POWA